Vente, location, réparation et entretien neufs ou usagé de compacteurs

Presse Compactage

 

 

Presse Compacteur Presse Compacteur

EXP-PV-6030 et EXP-PV-4024 balers from ECI.

 

 

Presse à carton et plastique

Innovative concept - Balers, cardboard, plastic, metal, …

ECI has created and fabricated a baler for cardboard, plastic, metal, etc… of high capacity which is one of the only baler that comes with an instant automatic ejection system quite superior to the chain system :

  • needless to hook chain from the back in order to begin ejecting operation.
  • therefore, less futile handling and loss of time.
  • pre-programmed intelligent relays control the operation of the baler.
  • ultra safe security ejection system. You cannot start the operation until unloading door is completely open.
  • the large capacity opening is accessible at the end of each cycle with the automatic opening door, saving you time and money.

 

Safe and economical

ECI is one of the few manufacturers to use a unique electric switch simultaneously controlling the entire security of the baler and its operation, delivering the following advantages : greater safety.

  • less costly repairs.
  • a single control switch while others use as many as four.
  • less expensive service calls and downtime for clients.
  • heavy duty design reducing risks of breakage.
  • ECI baler saves human time, energy and costs.

 

Custom made design and manufacturing

A free presentation could save you thousands of dollars.

Ejection system Ejection system Ejection system
Chainless automatic
ejection system
Safe ejection
system
Robust integrated
hydraulic system


Contact our Technical Information service

 

 

Modèles neufs

Option guide broche Compacteur Compacteur

 

  A B C D E H J K
EXP-PV-4024 93 / 2362 55 / 1397 38 / 965 37 / 940 19 / 483 68 / 1727 44 / 1118 40 / 1016
EXP-PV-6030 147 / 3734 79 / 2007 55 / 1397 52 / 1321 27 / 686 96 / 2438 56 / 1422 61 / 1549
  in / mm in/ mm in/ mm in/ mm in/ mm in/ mm in/ mm in/ mm

 

EXP-PV-4024

  • Loading opening : 37” x 19” (1016 mm x 483 mm).

  • Bale weight (cardboard) : +/- 150 to 350 lbs (70 kg à 160 kg).

  • Bale dimensions : 37” wide x 24” deep x 24” high
    (940 mm x 610 mm x 610 mm).

  • Equipement weight : 1694 lbs (770 kg).

  • Automatic bale ejector system activated
    with the opening of the door.

  • Hydraulic cylinder of 4 ” (102 mm).

  • Hydraulic system : 3 GPM.

  • Duration of cycle : 50 seconds.

  • Floor, U shaped steel : 1/4” (6 mm).

  • Walls, U shaped steel : 3/16” (4 mm).

  • Ram face, U shaped steel : 1/4” (6 mm).

  • Triangular shaped nylatron guides.

  • Normal compation : 20 000 lbs.

  • Maximum compaction : 31 400 lbs.

  • Normal pressure : 1600 psi.

  • Maximum pressure : 2100 psi.

  • Motor 3 h.p., 3,9 amp.

  • Double action directional valve 120 v.

  • Aluminium distribution block with integrated release cartridge.

  • Hydraulic fluid temperature and level indicator.

  • Cap with air filter.

  • Succion strainer : 10 microns.

  • Pressure gage mounted on the side of the control panel.

 

EXP-PV-6030

  • Loading opening : 60” x 27” (1524 mm x 686 mm).

  • Bale weight (cardboard) : +/- 1000 to 1200 lbs (455 kg à 545 kg).

  • Equipement weight : 1694 lbs (770 kg).

  • Bale dimensions : 60” wide x 30” deep x 48” high
    (1524 mm x 762 mm x 1219 mm).

  • Automatic bale ejector system activated with the opening of the door.

  • Hydraulic cylinder of 6 ” (152 mm).

  • Hydraulic system : 10 GPM.

  • Duration of cycle : 66 seconds.

  • Floor, U shaped steel : 1/4” (6 mm).

  • Walls, U shaped steel : 3/16” (4 mm).

  • Ram face, U shaped steel : 1/4” (6 mm).

  • Triangular shaped nylatron guides.

  • Normal compation : 51 000 lbs.

  • Maximum compaction : 70 000 lbs.

  • Normal pressure : 1800 psi.

  • Maximum pressure : 2300 psi.

  • Motor 10 h.p., 11 amp.

  • Double action directional valve 120 v.

  • Aluminium distribution block with integrated release cartridge.

  • Aluminium cast mounting to support the pump.

  • Hydraulic fluid temperature and level indicator.

  • Cap with air filter.

  • Access door to the reservoir.

  • Succion strainer : 10 microns.

  • Hydraulic filter : 10 microns.

  • Pressure gage mounted on the side of the control panel.

 

Système électrique
Système électrique

Electrical specifications

  • Automated control.

  • Emergency button, key selector to start the cycle or to active the ejection system, full light warning and two controls for the ejector.

  • Pressure switch for the full light warning.

  • Motor 10 HP, 60 hz, 3 phases (600 v.).

  • Transformer : 600 v. to 120 v.

  • Motor-contactor with overload relay.

  • CM4 panel, resistant to water, oil and dust.

 

Electrical system approved by CSA.